FUNCTION					SWITCHES
				Main				Others
TIME OF DAY CLOCK
Set Clock			Split/Set clock down	Change time with +/-
				(Adjust to known time that you
				 froze display, then release)
Synchronize Clock		Split/Set clock down	Reset (on beat) (use +/- to get
(to beat of WWV)					to beat) then set as above
To change to/from .01's		Select			+/- Hun/Sec

ODOMETER(s)
Adjust Factor			Factor			Adjust via toggles
Zero Main Odo			Any			Restart/Reset
Clear Internal Odo		Odo			Restart Only
Adjust Odo			Odo			+/-
Adjust Odo and Time		Odo & Calc Time		+/-  (enter mileage needed)
Display .000's			Set Clk Down		Reset
Zero Aux Odo			Any			Reset Only

CALC TIME
Pause/Gain			Calc Time		+/-
Adjust Calc Time and Odo	Odo & Calc Time		+/-  (enter mileage needed)
Transit  Zone			Any			CAST 0
Clear Aux Display		Any			Reset Only
(Center position registers changes)
Intelligent CAST		Hold Set Clk down	Activate CAST
							(On/Off toggle)
(The rightmost decimal point in Calc Time display will light up)
		
CASTs
To CAST				Any			CAST	
To Program Next Speed		Next Speed		Input w/ toggles
To Alter Current Speed		Speed			Input w/ toggles
(Updates from the last time "CAST" was hit)

AUX DISPLAY
Show total changes to:		See Below		Delta Symbol (Center)
Calc Time			Calc Time		(Shows changes made via
							 Calc Time only, i.e., pause)
Odometer			Odometer		(Shows all adjustments made)
To Reset Aux Odo		Odo			Reset
To Reset Aux Calc Time		Calc Time		Reset
To Reset Aux Mileage		Any			Reset, Aux Toggle in Odo
							(While Aux Mileage running)
To Reset Aux Calc Time		Any			Reset, Aux Toggle in Calc 
							(While Aux Calc Time running)

DRIVERS DISPLAY
To Display Under Differential	Select			+/- "10.00" toggle (toggle between)
Odometer			(Shows the same as Main Box)
CAST 				(Shows active CAST)
Speedometer			(Shows vehicle speed w/ correction factor)
Speed Difference		(Difference between CAST and vehicle speed)
Off				Off (Differential only shown)

ALL DISPLAYS	
Brightness			Select			+/- ".10" toggles intensity

FACTOR MATH:        (Official Distance x Old Factor) 
                    --------------------------------  =  New Factor
                          Indicated Distance